Gsdml File; Profinet Connection - LinMot C1250-IP Series Application Note

PLC Commissioning

6.2.2 GSDML File

Install the GSDML file that is part of the LinMot-Talk software/firmware you are using.
The most recent device files are always part of the newest LinMot-Talk software. They are located by default:
• PROFIdrive:

6.2.3 PROFINET Connection

The drive is connected to the PROFINET network using the X17 (Port1, IN) & X18 (Port 2, OUT) connectors.
NTI AG / LinMot
\\LinMot-Talk X.X Build XXXXXXXX\Firmware\Interfaces\ProfiNet\GSDML_PD
Page 49 of 205