4.3 PLC Setup PROFIBUS (E1430-DP-QN, E1230-DP-UC, E1130-DP-xx)
The following procedure can be used for all Siemens PLCs compatible with TIA Portal.
First of all, install the GSD file for the drive.
(TIA Portal → Options → Install general station description file (GSD))
The required GSD file can be found by default in the following folder:
C:\Program Files\LinMot\LinMot-Talk X.X Build XXXXXXXX\Firmware\Interfaces\PROFIBUS\GSD\
Drag and drop the desired drive from the catalogue to the network view.
Page 26 of 205
PLC Commissioning
NTI AG / LinMot