Recording Images From A Tape As Still Images - Sony DVCAM DSR-PDX10 Service Manual

Recording images from a tape as still
images
Your camcorder can read moving picture data recorded on a tape and record it as a still
image on a "Memory Stick." Your camcorder can also capture moving picture data
through the input connector and record it as a still image on a "Memory Stick."
Before operation
Insert a "Memory Stick" and the recorded tape into your camcorder.
(1) Set the POWER switch to VCR.
(2) Press N. Moving pictures recorded on the tape are played back.
(3) Press PHOTO lightly until the picture you want to capture from the tape
freezes and CAPTURE appears on the screen. Recording does not start yet.
To change from the selected image to another image, release PHOTO once and
press it lightly again.
(4) Press PHOTO deeper. The image displayed on the screen will be recorded on
the "Memory Stick." Recording is complete when the bar scroll indicator
disappears.
2
REW
3
[a] : Number of the recorded images
[b] : Approximate number of the images that can be recorded on the "Memory Stick"
PLAY FF
[a] [b]
SFN 1 / 12
640
CAPTURE
PB INDEX FN
4
640
SFN
PB INDEX FN
151