Sony DVCAM DSR-PDX10 Service Manual page 24

[SERVICE POSITION TO CHECK THE CAMERA SECTION]
Connection to Check the Camera Section
To check the camera section, set the camera to the "Forced camera power ON" mode.
Operate the camera functions of the zoom and focus using the adjustment remote commander (with the HOLD switch set in
the OFF position).
AC power
AC IN
adaptor
Battery panel block
DB-016 board
FP-498 flexible board
VC-318 board
Mechanism deck
Extention cable
(J-6082-466-A)
Lens block
Setting the "Forced Camera Power ON" mode
1) Select page: O, address: 01, and set data: 01.
2) Select page: D, address: 10, set data: 01 and
Exiting the "Forced Camera Power ON" mode
1) Select page: O, address: 01, and set data: 01.
2) Select page: D, address: 10, data: 00, and press the PAUSE
3) Select page : 0, address: 01, and set data: 00.
FP-499 flexible board
D B
- 0 1
6
2-13
press the PAUSE button of the adjustment remote
commander.
button of the adjustment remote commander.
JK-222 board
J K
- 2 2
2
Adjustment remote
commander (RM-95)
CD-389 board
DSR-PDX10/PDX10P
Monitor