— Advanced Playback Operations —
Searching for a recording by index
– INDEX SEARCH
You can automatically search for the point where an index is marked and start playback
from that point (INDEX SEARCH). Use a tape with cassette memory for convenience.
Use the Remote Commander for this operation.
Use this function to check where indexes are marked or to edit the tape at each
sequence where the index is marked.
Searching for the index point using cassette memory
Before operation
•You can use this function only when playing back a tape with cassette memory.
•Set CM SEARCH in
(1) Set the POWER switch to VCR.
(2) Press SEARCH MODE on the Remote Commander repeatedly until the INDEX
SEARCH indicator appears. The indicator changes as follows:
INDEX SEARCH t TITLE SEARCH t DATE SEARCH
(no indicator) T PHOTO SCAN T PHOTO SEARCH
(3) Press . or > on the Remote Commander to select the index point for
playback. Your camcorder automatically starts playing back at the selected
index point.
2
INDEX SEARCH
1
SEARCH
2
MODE
3
4
5
6
3
.
>
[a] Actual point you are trying to search for
[b] Present point on the tape
To stop searching
Press x.
to ON in the menu settings. The default setting is ON.
PROG
CAM
5/ 9/02
17:30
LINE
6/ 9/02
8 : 50
CAM
24/ 12/02
10:30
CAM
1/ 1/03
23: 25
CAM
11/ 2/03
16:11
CAM
29/ 4/03
13:45
INDEX SEARCH
PROG
1
5/ 9/02
17:30
CAM
2
6/ 9/02
8:50
LINE
3
24/ 12/02
10: 30
CAM
4
1/ 1/03
23: 25
CAM
5
11/ 2/03
16:11
CAM
6
29/ 4/03
13:45
CAM
[b] [a]
87