Sony DVCAM DSR-PDX10 Service Manual page 213

DSR-PDX10/PDX10P
2-3-13. LS Cam Plate, Tension Coil Spring (Brake-S), Brake-S, Torsion Coil Spring (Brake Arm),
Cassette Position Set-S, Brake-S Driving Arm Assy
1. Removal procedure
1) Remove the screw (M1.4 × 1.4) 1.
2) Remove the LS cam plate.
3) Remove the tension coil spring (brake-S).
4) Remove the brake-S.
5) Remove the screw (M1.4 × 2) 2.
6) Remove the torsion coil spring (brake arm).
7) Remove the cassette position set-S from groove of the LS block
assy in the direction of the arrow A.
8) Remove the brake-S drive arm assy from groove of the LS
block assy in the direction of the arrow B.
Cassette position set-S
Insert the cassette position
set-S under the
groove of the LS
chassis block assy.
Cassette position set-S
Brake-S drive arm assy
Brake-S arm shaft
1 Screw (M1.4 × 1.4)
LS cam plate
2 Screw (M1.4 × 2)
Torsion coil spring (brake arm)
Tension coil spring (brake-S)
A
Brake-S
B
C
Dowel
LS chassis block assy
2. Attachment procedure
1) Insert the brake-S drive arm assy under groove of the LS chassis
block assy. Attach the brake-S drive arm assy to the brake-S
arm shaft and to the brake-S pivot shaft.
2) Insert the cassette position set-S under the groove of the LS
chassis block assy. Attach the cassette position set-S to the
brake-S arm shaft.
3) Attach the torsion coil spring (brake arm).
4) Attach the screw (M1.4 × 2) 2 to the brake-S arm shaft.
5) Attach the brake-S to the brake-S arm bearing and to the brake-
S pivot shaft.
6) Hook the tension coil spring (brake-S) to the spring stay of the
cassette position set-S and the spring stay of the brake-S.
7) Align the slot of the LS cam plate with the dowel. Move then
in the direction toward the arrow C and attach the screw (M1.4
× 1.4) 1.
8) Perform the LS cam plate position adjustment referring to
section 2-3-11.
Insert the brake-S drive arm
assy under groove of the LS
chassis block assy.
B
Brake-S pivot
shaft
Fig. 6-2-18.
6-58
Cassette position set-S
Torsion coil spring (brake arm)
Screw (M1.4 × 2)
Brake-S
Brake-S drive arm assy
LS cam plate
1 Screw
Tension coil spring
Dowel of LS chassis
(brake-S)
block assy
(M1.4 × 1.4)
C