Recording Images From A Tape As Still Images - Sony CCD-TRV118 Service Manual

Recording images from a tape as still
images
Your camcorder can read moving picture data recorded on a tape in the Digital8
system, and record it as a still image on a "Memory Stick."
Your camcorder can also capture moving picture data through the input connector and
record it as a still image on a "Memory Stick."
Before operation
•Insert a tape recorded in the Digital8
•Insert a "Memory Stick" into your camcorder.
(1) Set the POWER switch to VCR.
(2) Press N. Moving pictures recorded on the tape are played back.
(3) Keep pressing PHOTO lightly until the picture from the tape freezes.
The CAPTURE indicator appears on the screen. Recording does not start yet.
To change the still image, release PHOTO and select a still image again.
(4) Press PHOTO deeper. Recording is complete when the bar scroll indicator
disappears. The image displayed on the screen when you pressed PHOTO
deeper will be recorded on the "Memory Stick." Playback of the tape is
resumed.
2
136
PLAY
system into your camcorder.
3
4
FINE 50
CAPTURE
101
FINE
101