Sony DVCAM DSR-PDX10 Service Manual page 159

DSR-PDX10/PDX10P
6-1. CAMERA SECTION ADJUSTMENT
1-1. PREPARATIONS BEFORE ADJUSTMENT (CAMERA SECTION)
1-1-1. List of Service Tools
• Oscilloscope
• Regulated power supply
Ref. No.
J-1 Filter for color temperature correction (C14)
ND filter 1.0
J-2 ND filter 0.4
ND filter 0.1
J-3 Pattern box PTB-450
J-4 Color chart for pattern box
Adjustment remote commander
J-5
(RM-95 upgraded) (Note1)
J-6 Siemens star chart
J-7 Clear chart for pattern box
J-8 CPC-8jig
J-9 Extension cable (60P 0.5mm)
J-10 Mini pattern box
J-11 Camera table
J-12 CPC jig for LCD panel
J-13 Background paper
J-14 Cleaning fluid
J-15 Wiping cloth
Super-fine applicator
J-16
(made by Nippon Applicator (P752D))
J-17 Mirror (small oval type)
J-18 Tracking tape (XH2-1A1) (NTSC/PAL)
J-19 Mini DV torque cassette
J-20 TG1 adjustment jig (FWD position adjustment)
J-21 TG1 FWD adjustment screwdriver
J-22 Dummy drum (for TG36) (J mechanism)
J-23 TG36 gauge
J-24 Torque screwdriver
J-25 Tape path screwdriver
J-26 Mode Selector II
J-27 Mode Selector II conversion board (J)
Mode Selector II ROM (supporting J mechanism)
J-28
(Note 2)
Note1: If the micro processor IC in the adjustment remote commander is
not the new micro processor (UPD7503G-C56-12), the pages
cannot be switched. In this case, replace with the new micro
processor (8-759-148-35).
Note2: This is the ROM used for upgrading the version of Mode Selector
II to enable it to be used for the J mechanism.
• Color monitor
• Digital voltmeter
Name
• Vectorscope
Parts Code
Auto white balance adjustment/check
J-6080-058-A
White balance adjustment/check
J-6080-808-A White balance check
J-6080-806-A White balance check
J-6080-807-A White balance check
J-6082-200-A
J-6020-250-A
J-6082-053-B
J-6080-875-A For checking the flange back
J-6080-621-A
For adjusting the video section
J-6082-388-A
For adjusting the viewfinder system
For extension between the CD-386 board (CN100) – VC-
J-6082-446-A
318 board (CN1201)
J-6082-353-B For adjusting the flange back
J-6082-384-A For adjusting the flange back
J-6082-529-A For adjusting the LCD system
J-2501-130-A For AF laser output adjustment
Y-2031-001-0
7-741-900-53
–
J-6080-840-A Tape path adjustment
8-967-999-03 Tape path adjustment
J -6082-360-A
J -6082-492-A
J -6082-364-A For TG1 FWD position adjustment
J -6082-490-A
J -6082-491-A
J -9049-330-A
J -6082-026-A For tape path adjustment
J -6082-282-B General adjustment (ROM version 1.7)
J -6082-493-A
J -6082-314-E ROM for Mode Selector II
6-4
Ver 1.4 2003. 07
Usage