Sony DVCAM DSR-PDX10 Service Manual page 475

Changing the default settings with the menu
Icon/item Mode
OTHERS
DISPLAY
z LCD
DATE REC
z OFF
REC LAMP
z ON
VIDEO EDIT
z RETURN
HRS METER
OPERATION
DRUM RUN
TAPE RUN
THREADING
Note
If you press DISPLAY/TOUCH PANEL with DISPLAY set to V-OUT/LCD in the menu
settings, the picture from a TV or VCR will not appear on the LCD screen even when
your camcorder is connected to outputs on the TV or VCR.
When recording a close subject
When REC LAMP is set to ON, the red camera recording lamp on the front of the
camcorder may reflect on the subject if it is close. In this case, we recommend that you
set REC LAMP to OFF.
Meaning
To show the display on the LCD screen and in
the viewfinder
V-OUT/LCD To show the display on a TV screen, LCD screen
and in the viewfinder
To not superimpose the date and time on the
picture
ON To superimpose the date and time on the picture
(p. 85)
To light up the camera recording lamp at the
front of your camcorder
OFF To turn the camera recording lamp off so that
the person is not aware of the recording
To cancel video editing
TAPE To make programme and dub on the tape in the
other VCR (p. 101)
MEMORY To make programme and dub on a "Memory
Stick" (p. 167)
The cumulative total hours of operation is
displayed in 10-operation increments
The cumulative total hours of drum rotation
with tape threaded is displayed in 10-operation
increments
The cumulative total hours of tape running is
displayed in 10-operation increments
The cumulative number of tape unthreading
operation is displayed in 10-operation
increments
POWER
switch
VCR
CAMERA
MEMORY
CAMERA
CAMERA
MEMORY
VCR
VCR
CAMERA
223