Sony DVCAM DSR-PDX10 Service Manual page 394

Using a "Memory Stick" – Introduction
Selecting the image size
You can select either of two image sizes
Still images:
Moving pictures: 320 × 240 or 160 × 112
(1) Set the POWER switch to MEMORY. Make sure that the LOCK switch is set to
(2) Press MENU, then turn the SEL/PUSH EXEC dial to select STILL SET (still
(3) Turn the SEL/PUSH EXEC dial to select IMAGESIZE, then press the dial.
(4) Turn the SEL/PUSH EXEC dial to select the desired image size, then press the
1
LOCK
142
1152 × 864 or 640 × 480. (When the POWER switch is set to CAMERA
or VCR, the image size is automatically set to 640 × 480.)
The default setting is 1152 × 864.
The default setting is 320 × 240.
the further side (unlock position).
image) or MOVIE SET (moving picture) in
dial.
The indicator changes as follows:
Still images:
Moving pictures:
POWER
MENU
1152 640
320 160
3
STILL SET
MEMORY SET
1152
STILL SET
BURST
QUALITY
IMAGESIZE 1152 × 864
RETURN 640 × 480
REMAIN
[ MENU ] : END
4
STILL SET
MEMORY SET
STILL SET
BURST
QUALITY
IMAGESIZE 640 × 480
RETURN
REMAIN
[ MENU ] : END
, then press the dial (p. 217).
MOVIE SET
MEMORY SET
MOVIE SET
IMAGESIZE
REMAIN
RETURN
12
[ MENU ] : END
MOVIE SET
MEMORY SET
MOVIE SET
IMAGESIZE
REMAIN
RETURN
40
[ MENU ] : END
320
320 × 240
160 × 112
REMAIN
1min
160 × 112
REMAIN
5min