Sony DVCAM DSR-PDX10 Service Manual page 194

4. Backlight Adjustment (DB-016 board)
Set the backlight luminance.
If deviated, the image may become dark or bright.
Mode Camera
Subject Arbitrary
Measurement Point Pin 3 of CN1008 of VC-318 board
(EVF LED DA)
Measuring Instrument Digital voltmeter
Adjustment Page C
Adjustment Address 4F, 50
Specified Value NORMAL mode : A=1.12 ± 0.05Vdc
BRIGHT mode : B=2.10 ± 0.05Vdc
Note: The data of page: 0, address: 10 must be "00".
Adjusting method:
Order Page Address Data
1 0 01 01
2 C 4F
3 C 4F
4 C 50
5 C 50
6 0 01 00
Procedure
Set the data.
Change the data and set the EVF
LED DA voltage (A) to the specified
value of NORMAL mode.
Press PAUSE button.
Change the data and set the EVF
LED DA voltage (B) to the
specified value of BRIGHT mode.
Press PAUSE button.
Set the data.
6-39
DSR-PDX10/PDX10P