Sony DVCAM DSR-PDX10 Service Manual page 184

12. Auto White Balance Adjustment
Adjust to the proper auto white balance output data.
If it is not correct, auto white balance and color reproducibility will
be poor.
Subject Clear chart
(Color reproduction adjustment frame)
Filter Filter C14 for color temperature correction
Adjustment Page F
Adjustment Address 40 to 43
Note1: After the power is turned on, this adjustment can be done only
once.
Note2: The data of page: 0, address: 10 must be "00".
Note3: Check that the data of page: 6, address: 02 is "00". If not, turn off
the power and turn on again.
Switch setting:
1) POWER .................................................................. CAMERA
2) DIGITAL ZOOM (Menu display) ................................... OFF
3) STEADY SHOT (Menu display) ..................................... OFF
Adjusting method:
Order Page Address Data
1
2 0 01 01
3 6 01 83
4 6 01 81
5 6 02
Note4: The adjustment data will be automatically input to page: F, address:
40 to 43.
Processing after Completing Adjustments:
Order Page Address Data
1 6 01 00
2 0 01 00
3
Procedure
Place the C14 filter for color
temperature correction on the lens.
Set the data.
Set the data, and press PAUSE
button.
Set the data, and press PAUSE
button.
Check that the data changes to
"01". (Note4)
Procedure
Set the data, and press PAUSE
button.
Set the data.
Remove the C14 filter.
6-29
DSR-PDX10/PDX10P