Sony DVCAM DSR-PDX10 Service Manual page 378

Superimposing a title
(1) In the recording , recording standby, playback or playback pause, press
(2) Turn the SEL/PUSH EXEC dial to select
(3) Turn the SEL/PUSH EXEC dial to select the desired title, then press the dial.
(4) Change the colour, size, or position, if necessary.
(5) Press the SEL/PUSH EXEC dial again to complete the setting.
126
If you use a tape with cassette memory, you can superimpose the title. When
you play back the tape, the title is displayed for five seconds from the point
where you superimposed it.
MENU, then select TITLE in
The title flashes.
1 Turn the SEL/PUSH EXEC dial to select COLOUR, SIZE or POSITION,
then press the dial. The selected item appears.
2 Turn the SEL/PUSH EXEC dial to select the desired item, then press the
dial.
3 Repeat steps 1 and 2 until the title is laid out as desired.
In the recording, playback or playback pause:
The TITLE SAVE indicator appears on the screen for five seconds and the title
is set.
In the standby:
The TITLE indicator appears. When you press START/STOP to start
recording, TITLE SAVE appears on the screen for five seconds, and the title is
set.
MENU
SCENE5
with the SEL/PUSH EXEC dial (p. 219).
, then press the dial.
2
PRESET TITLE
SCENE1
SCENE2
SCENE3
SCENE4
SCENE5
SCENE6
SCENE7
SCENE8
[ MENU ] : END
3
PRESET TITLE
SCENE1
SCENE2
SCENE3
SCENE4
SCENE5
SCENE6
SCENE7
SCENE8
RETURN
[ MENU ] : END
4
SIZE SMALL
SIZE LARGE
SCENE5
PRESET TITLE
SCENE1
SCENE2
SCENE3
SCENE4
SCENE5
SCENE6
SCENE7
SCENE8
RETURN
[ MENU ] : END
TITLE
SCENE5
[ EXEC ] : SAVE [ MENU ] : END
TITLE
SCENE5
[ EXEC ] : SAVE [ MENU ] : END