Sony DVCAM DSR-PDX10 Service Manual page 350

— Editing —
Dubbing a tape
Using the A/V connecting cable
You can dub or edit on the VCR connected to your camcorder using your camcorder as
a player.
Connect your camcorder to the VCR using the A/V connecting cable supplied with
your camcorder.
Before operation
• Set DISPLAY in
• Press the following buttons to make the indicator disappear so that they will not be
superimposed on the edited tape:
On your camcorder:
DISPLAY/TOUCH PANEL, DATA CODE
On the Remote Commander:
DISPLAY, DATA CODE, SEARCH MODE
(1) Insert a blank tape (or a tape you want to record over) into the VCR, and insert
(2) Prepare the VCR for recording, then set the input selector to LINE.
(3) Set the POWER switch to VCR on your camcorder.
(4) Play back the recorded tape on your camcorder.
(5) Start recording on the VCR. Refer to the operating instructions of your VCR.
: Signal flow
When you have finished dubbing a tape
Press x on both your camcorder and the VCR.
98
to LCD in the menu settings. (The default setting is LCD.)
the recorded tape into your camcorder.
Connect the A/V connecting cable to the AUDIO/VIDEO jack.
Refer to the operating instructions of the VCR.
AUDIO/VIDEO
S VIDEO
A/V connecting
cable (supplied)
White
IN
Yellow
S VIDEO
VIDEO
AUDIO
Red
VCR