Sony DVCAM DSR-PDX10 Service Manual page 372

Audio dubbing
Monitoring the new recorded sound
(1) Play back the tape on which you added audio.
(2) Turn the SEL/PUSH EXEC dial to select AUDIO MIX in
(3) Turn the SEL/PUSH EXEC dial to adjust the balance between the original
Notes
• New sound cannot be recorded on a tape already recorded in the Fs48K mode.
• New audio cannot be recorded on a tape already recorded in the DV SP mode.
• You cannot add audio on the blank portion of the tape.
If an i.LINK cable (optional) is connected to your camcorder
You cannot add audio to a recorded tape.
We recommend that you add audio on a tape recorded with your camcorder
If you add audio on a tape recorded with another camcorder (including another
DSR-PDX10P), the sound quality may become worse.
If you set the write-protect tab of the cassette to lock
You cannot record on a tape. Slide the write-protect tab to release the write protection.
120
settings, then press the dial.
sound (channel1/channel2) and the new sound (channel3/channel4), then
press the dial.
The default setting is original sound (channel1/channel2) only.
VCR SET
CH SELECT
AUD I O M I X
A / V DV OUT CH1 CH3
NTSC PB 2 4
RETURN
[MENU] : END
in the menu