Sony DVCAM DSR-PDX10 Service Manual page 212

2-3-12. LS Chassis Block Assy, LS Guide Retainer
1. Removal procedure
1) Remove the FP-100 flexible wiring board from the FPC
connector on the FP-102 flexible wiring board.
Remove the screw (M1.4 × 2.5) 2. Remove the FPC holder
2)
from DC motor (capstan).
Remove the two screws (M1.4 × 2) 1.
3)
4) Remove the LS retainer in the direction of the arrow A on the
top.
5) Remove the E-type stop ring 1.5 3.
6) Remove the LS chassis block assy in the direction of the arrow
B.
LS cam plate
Dowel of LS arm
Insert dowel of the LS
arm into the LS cam
plate groove
Dowel of LS arm
1 Two screws (M1.4 × 2)
A
LS guide retainer
C
Brake-T block assy
LS guide shaft S1
LS guide shaft
S2
Mechanism chassis block assy
2. Attachment procedure
1) Confirm that the brake-T block assy has been moved in the
counter-clockwise direction C. While pressing the TG7 block
in the direction of the arrow D, insert the LS guide shafts T1
and T2 of the LS chassis block assy into the slots of the
mechanism chassis with slanted angle.
2) While inserting the LS arm dowel into the LS cam plate groove,
insert the LS guide shafts S1 and S2 into the slots of the LS
chassis block assy as shown.
3) Insert the LS guide retainer from the top, align it with the LS
guide shafts S1 and S2 and fix it with the screw (M1.4 × 2) 1.
Tightening torque: 0.059 to 0.01 N•m (0.6 kg•cm).
4) Confirm that the LS guide retainer has play, is not lifted up, is
not installed in opposite direction and has not been deformed.
5) Attach the E-type stop ring 1.5 3 into the LS guide shaft T1.
6) Insert the FPC holder into DC motor (capstan) in the direction
of the arrow E and fix it with the screw (M1.4 × 2.5) 2.
7) Connect the flexible wiring board coming from the FP-100
flexible wiring board into the FPC connector.
FP-102 flexible wiring board
FPC connector
FP-100 flexible wiring board
TG7 block assy
D
B
Fig. 6-2-17.
6-57
DSR-PDX10/PDX10P
2 Screw (M1.4 × 2.5)
FP-102 flexible wiring board
FPC holder
E
LS chassis block assy
LS guide shaft T1
LS guide shaft T2
FP-100 flexible wiring board
DC motor (capstan)
3 E-type stop ring 1.5