Sony DVCAM DSR-PDX10 Service Manual page 362

Dubbing only desired scenes – Digital program editing (on tapes)
Erasing the programme you have set
Erase OUT first and then IN from of the last programme.
(1) Turn the SEL/PUSH EXEC dial to select UNDO, then press the dial.
(2) Turn the SEL/PUSH EXEC dial to select EXECUTE, then press the dial.
To cancel erasing
Select RETURN with the SEL/PUSH EXEC dial in step 2.
Erasing all programmes
(1) Turn the SEL/PUSH EXEC dial to select ERASE ALL.
(2) Turn the SEL/PUSH EXEC dial to select EXECUTE, then press the dial.
To cancel erasing all programmes
Select RETURN with the SEL/PUSH EXEC dial in step 2.
To cancel a programme you have set
Press MENU.
The programme is stored in memory until the tape is ejected.
Note
You cannot operate recording during Digital program editing.
If the tape has a blank portion
You cannot set IN and OUT on the portion.
The total time may not be displayed correctly in the following cases
– When there is a blank portion between IN and OUT on the tape.
– When you mix recordings in the DVCAM format and DV format on one tape.
110
The last set programme mark flashes, then the setting is cancelled.
All the programme marks flash, then the settings are cancelled.