Sony DVCAM DSR-PDX10 Service Manual page 383

Labelling a cassette
If you use a cassette with cassette memory, you can label a cassette. Labels can
consist of up to 10 characters and is stored in cassette memory. When you insert
the labelled cassette and when the POWER switch is set to CAMERA or VCR,
the label is displayed for about five seconds.
(1) Insert the cassette you want to label.
(2) Set the POWER switch to CAMERA or VCR.
(3) Press MENU, then turn the SEL/PUSH EXEC dial to select TAPE TITLE in
then press the dial (p. 219). Tape title display appears.
(4) Turn the SEL/PUSH EXEC dial to select the column of the desired character,
then press the dial.
(5) Turn the SEL/PUSH EXEC dial to select the desired character, then press the
dial.
(6) Repeat steps 4 and 5 until you finish the label.
(7) Turn the SEL/PUSH EXEC dial to select [SET], then press the dial.
The label is stored in the memory.
3
CM SET
T I TLE READY
T I TLEERASE
T I TLE DSPL
CM SEARCH
TAPE T I TLE
I TEM ERASE
ERASE ALL
RETURN
CM SET
T I TLE
[MENU] : END
T I TLEERASE
T I TLE DSPL
CM SEARCH
TAPE T I TLE
I TEM ERASE
ERASE ALL
RETURN
TAPE TITLE
[MENU] : END
– – – – – – – – – –
[ MENU ] : END
MENU
4~6
– – – – – – – – – –
TAPE TITLE
– – – – – – – – – –
[ MENU ] : END
TAPE TITLE
– – – – – – – – – –
[ MENU ] : END
TAPE TITLE
– – – – – – – – – –
[ MENU ] : END
TAPE TITLE
M
– – – – – – – – –
[ MENU ] : END
,
131