Commissioning
7.2.2.1
Tool detection
All tool shapes are permitted in principle. Please note the warnings given under
shapes [
Assignment to a tool class depends on
Compliance with the requirement from EN 12622, whereby the protected field must safe-
}
guard areas lying 15 mm before the front bending line.
Full or partial detection of the upper tool via the protected field.
}
Fig.: Classification of tools into tool classes
Operating Manual PSENvip R, PSENvip R LR,PSENvip E
1003449-EN-06
15].
H3
H2
3
2
1
H1 B1
V1
V2
V3
<15 mm
>15 mm
Tool
| 93