Table of Contents
Advertisement
Overview
2
Overview
PSENvip is a camera-based protection and measuring system (electrosensitive protective
equipment) for press brakes. It consists of a transmitter, receiver and a PSSu module to
evaluate recordings. It monitors the detection zone between the transmitter and receiver
below the moving upper tool. Operation, visualisation and configuration is via a web inter-
face on the CNC or control system driving the press.
Fig.: Components of the PSENvip
Transmitter PSENvip E[2]
Generates parallel beam
}
2 inputs for controlling the light source
}
Receiver PSENvip R/PSENvip R LR [1]
Receives the light generated by the transmitter
}
Sends image date to the special module PSSu K F FAU
}
LED display for the status of the OSSD signal
}
Special module PSSu K F FAU [3]
Image evaluation of the data provided by the receiver
}
Evaluation of protected field and fast shutdown of the press if the protected field is viol-
}
ated
2 outputs to control the transmitter
}
Communication via Ethernet interface with the CNC
}
Troubleshooting and diagnostics
}
Operating Manual PSENvip R, PSENvip R LR,PSENvip E
1003449-EN-06
[1]
[2]
[3]
| 8
Advertisement
Table of Contents
