Change, maintenance
10
Change, maintenance
Tests are used for early identification of defects on the press brake and its safeguards.
They help to maintain a safe, working condition, i.e. to prevent accidents.
The test of the protective equipment consists of:
A function test using the test piece
}
and
a visual inspection
}
Operating Manual PSENvip R, PSENvip R LR,PSENvip E
1003449-EN-06
WARNING!
The press brake must be shut down immediately if the test reveals a
fault!
Failure to comply could result in a hazardous situation, which could lead
to serious injury and death.
In this case, have the safety equipment checked by qualified staff.
| 108