Table of Contents
Advertisement
Commissioning
Tool class 1
The contour of these tools is fully detected by the PSENvip.
}
The front (V1 or B1) and rear (H1 or B1) bending lines are within the protected field.
}
The front segments of the protected field are at least 15 mm away from the front bending
}
line.
These tools are safeguarded in compliance with the standards.
}
Example:
}
Fig.: Example for tool class 1
Operating Manual PSENvip R, PSENvip R LR,PSENvip E
1003449-EN-06
max. 32 mm
> 15 mm
H
V
H
> 15 mm
V
| 94
Advertisement
Table of Contents
