Pilz PSENvip R Operating Manual page 73

Installation
[1]
[2]
[3]
[4]
[5]
Fig.: Installing transmitter and receiver
Legend:
[1]: Nut
}
[2]: Auxiliary adjustment plate
}
[3]: Adjustment plate
}
[4]: Flat washer
}
[5]: Mounting plate
}
Viewed from the operator's side, the receiver is installed on either the left or right-hand
bracket and then the transmitter on the other bracket.
Slide the nut slot on the adjustment plate into the groove on the bracket attached to the
}
upper die.
Operating Manual PSENvip R, PSENvip R LR,PSENvip E
1003449-EN-06
| 73