Editing The Confidential Id; Printing A Confidential Fax Message (Function 54) - Ricoh FAX2900L Operator's Manual

SMTEN990427_FM.book Page 72 Thursday, September 2, 1999 10:03 AM
Other Features
D
Input the Confidential ID that
you will be using.
CONFID'L ID
6754
Note
Example: {6} {7} {5} {4} from
the ten key pad.
E
Press the { { { { Yes} } } } key.
F
Press the { { { { Function} } } } key.

Editing the Confidential ID

A
5
Press the { { { { Function} } } } { { { { 6} } } } then enter
access code { { { { 2} } } } { { { { 2} } } } { { { { 2} } } } { { { { 2} } } } . Then
press { { { { 6} } } } { { { { 1} } } } and the { { { { Yes} } } } key.
SET G3 OWN NUMBER
B
Press V V V V until the screen is as
shown.
SET CONFIDENTIAL ID
C
Press the { { { { Yes} } } } key.
CONF. ID CHANGE? Y/N
6754
D
Press the { { { { Yes} } } } key.
CONFID'L ID
6754
E
Press the { { { { No} } } } key and input a
new confidential ID code.
Note
Example: {8} {3} {5} {2}.
72
F
Press the { { { { Yes} } } } key.
CONFID'L ID
Y/N
8352
G
Press the { { { { Function} } } } key.
Printing a Confidential Fax
Message (Function 54)
If the Receive File indicator is blink-
ing, do the following to print the mes-
sage.
Note
If the Receive File indicator is
blinking, an incoming fax message
has been stored in the memory us-
ing the Memory Lock feature or
Confidential Reception feature.
Y/NEXTi
Reference
To print the message which is
Memory Locked, see P.43 "Printing
a Memory-locked Message (Function
55)".
A
Y/NEXTi
Press the { { { { Function} } } } { { { { 5} } } } { { { { 4} } } } and
the { { { { Yes} } } } key.
CONFID'L ID
kkkk
B
Input the ID.
CONFID'L ID
kkkk
Y/N
Note
Example: {6} {7} {5} {4} from
the ten key pad.
If you cannot output a confiden-
tial file with this ID, you have
input the wrong ID or the send-
er may have over-ridden your
ID. Contact your sender.
Y/N
KPAD
START/N