Setting The Number Of Copies (Function 83); Programming The Special Terminals To Make Multi-Sort-Copies - Ricoh FAX2900L Operator's Manual

SMTEN990427_FM.book Page 79 Thursday, September 2, 1999 10:03 AM
E
Press the { { { { Yes} } } } key.
F
Press the { { { { Function} } } } key to finish.
Setting the Number of Copies
(Function 83)
A
Press the { { { { Function} } } } { { { { 6} } } } then enter
access code { { { { 2} } } } { { { { 2} } } } { { { { 2} } } } { { { { 2} } } } . Then
press { { { { 8} } } } { { { { 3} } } } and the { { { { Yes} } } } key.
NO. OF COPIES KPAD/Y
1 SETS
B
Input the number of copies that
you need, then press the { { { { Yes} } } }
key.
Copies of incoming faxes will be
collated.
NO. OF COPIES KPAD/Y
3 SETS
Note
Maximum number of copies: 9.
To use Multi-sort Document Re-
ception, you must switch Re-
verse Order Printing on. See
P.91 "Reverse Order Printing"
for how to do this.
C
Press the { { { { Function} } } } key.
Programming the Special
Terminals to Make Multi-sort-
copies
To program the list of senders, see
P.75 "Entering a List of Senders to Treat
Differently (Function 81)".
Multi-sort Document Reception
5
79