Editing The Id Code; Making A Transfer Request - Ricoh FAX2900L Operator's Manual

SMTEN990427_FM.book Page 62 Thursday, September 2, 1999 10:03 AM
Other Features

Editing the ID Code

If you want to change the ID code, do
the following.
A
Press the { { { { Function} } } } { { { { 6} } } } then enter
the access code { { { { 2} } } } { { { { 2} } } } { { { { 2} } } } { { { { 2} } } } .
Then press { { { { 6} } } } { { { { 1} } } } and the { { { { Yes} } } }
key.
SET G3 OWN NUMBER
B
Press V V V V until the opposite display
appears.
5
SET POLLING ID
C
Press the { { { { Yes} } } } key.
POLL. ID CHANGE? Y/N
1234
D
Press the { { { { Yes} } } } and { { { { No} } } } keys.
POLLING ID
kkkk
E
Input a new ID.
POLLING ID
5433
Note
Example: {5} {4} {3} {3}
F
Press the { { { { Yes} } } } and { { { { Function} } } }
keys.

Making a Transfer Request

After you stored your Machine's Own
Telephone Number and ID code you
62
can do the transfer request as in the
following procedure.
Note
You may use some transmission
options, such as Sending at a Spe-
cific Time. See P.23 "Sending at a
Specific Time (Send Later)".
A
Make sure that the machine is in
standby mode.
Y/NEXTi
READY
SET DOC. OR DIAL NO.
B
Place your document in the feed-
er.
Y/NEXTi
TRANSMIT
DIAL FAX NUMBER
C
Press the { { { { Function} } } } { { { { 1} } } } { { { { 3} } } } and
the { { { { Yes} } } } key.
TRANSFER
DIAL FAX NUMBER
D
KPAD
Input the telephone number of
the transfer broadcasting station,
then press the { { { { Yes} } } } key.
TRANSFER
DESTINATION #kk
Y/N
Limitation
This machine must be of the
same manufacturer as yours,
and it must be able to act as a
Transfer Station.
E
Input the destinations for this
transfer broadcaster.
TRANSFER
DESTINATION #*10
100% 10:00AM
OPTIONi
OPTIONi
*/KPAD
Y/N