Storing A Telephone Number - Ricoh FAX2900L Operator's Manual

SMTEN990427_FM.book Page 187 Thursday, September 2, 1999 10:03 AM
address key. Then enter the
subaddress.
To enter a subaddress, you
must use a Dial Option Key. On
how to program a Dial Option
Key using Function 31, seeP.30
"Storing, Editing & Erasing Quick
Dial Numbers (Function 31)".
You can also store a subaddress
in a User Function key (F1 or F2)
and recall it later. For how to
program the User Function
Keys, see P.107 "User Function
Keys (Function 36)".
Reference
On how to dial, P.15 "Memory
Transmission
Transmission".
E
Press the { { { { Yes} } } } key.
TRANSMIT
DIAL NEXT NUMBER
F
Either:
• Dial more numbers: go to step
D D D D .
• Start the transmission: press
the { { { { Start} } } } key.
Note
If the other party has not had a
G4 Terminal ID programmed,
you will see "=" on the screen
during transmission, instead of
their ID.

Storing a Telephone Number

The following example shows how to
store a Quick Dial if the ISDN Inter-
face has been installed. The differenc-
es between this procedure and the
procedure for the base machine (P.30
"Storing & Editing Fax Numbers (Func-
tions 31 & 32)") are as follows:
• You have to select G3 or G4 before
• You may have to input a subad-
A
B
And Immediate
DIAL/START
C
D
you input a Quick Dial or Speed
Dial.
dress for a G4 number if the desti-
nation has one.
Press the { { { { Function} } } } { { { { 3} } } } { { { { 1} } } } and
{ { { { Yes} } } } keys.
ak QUICK/hi
PRINT/LISTh/SEARCHi
Press the Quick Dial Key that you
wish to program.
Example: {01} {Yes}.
a01 QUICK/hi
kkkkkkkk<G3>kkkkkkkk
Change the line type (G3/G4) to
the correct setting by pressing the
G4 key on the operation panel.
Enter the telephone number at the
operation panel's ten key pad.
a01
7005551234kkkkkkkkkk
Note
G3 numbers – If your machine is
behind a PBX, include the PBX
access code and a pause before
the number. For an internation-
al number, place a pause after
the country code.
G4 numbers – If you wish to en-
ter a subaddress, press the User
Function Key that you have al-
ready programmed as the sub-
address key. Then enter the
subaddress.
Operation
KPAD/N 9
187