Selecting Which Messages To Forward; Switching Local Printing On / Off; Enabling And Disabling The Forwarding Mark - Ricoh FAX2900L Operator's Manual

SMTEN990427_FM.book Page 89 Thursday, September 2, 1999 10:03 AM
Selecting Which Messages to
Forward
To choose which messages are for-
warded, adjust bit 7 of switch 8 with
the User Parameters. Two settings are
available.
• Forward all incoming messages
from specified senders (bit 7=0).
• Forward all incoming messages
except those from specified send-
ers (bit 7=1).
(See P.166 "User Parameters").
Switching Local Printing on /
off
You can choose whether your ma-
chine prints copies of messages that it
forwards (by default, these messages
are printed). To change this setting,
adjust bit 6 of switch 11 with the User
Parameters:
• Bit 6=0 : Do not print
• Bit 6=1 : Print
(See P.166 "User Parameters").
Enabling and Disabling the
Forwarding Mark
The forwarding mark is printed at the
receiving end on the top of each page
of the fax messages that are forward-
ed from your machine. This mark will
help the operator at the other end to
recognize messages that have been
forwarded. If you wish, you can
switch this mark off.
To switch the Forwarding Mark on or
off, adjust bit 0 of switch 2 with the
User Parameters:
• Bit 1=0 : Forwarding mark off
• Bit 1=1 : Forwarding mark on
(See P.166 "User Parameters").
Forwarding
5
89