Automatic Fallback From Group 4 Mode To Group 3 Mode - Ricoh FAX2900L Operator's Manual

SMTEN990427_FM.book Page 188 Thursday, September 2, 1999 10:03 AM
ISDN
To enter a subaddress, you
must use a Dial Option Key. On
how to program a Dial Option
Key using Function 31, seeP.30
"Storing & Editing Fax Numbers
(Functions 31 & 32)".
E
Press the { { { { Yes} } } } key.
a01
PROGRAM LABEL?
F
Either:
• Program
number: go to step G G G G .
• Do not program a label: Press
the { { { { No} } } } key. Go to step I I I I .
G
Input a label using the Quick Dial
keys.
Then press the {Yes} key.
a01
LABEL SET
H
Switch Label Insertion on or off.
a01
LABEL SET
9
Note
Use the W and V arrows on the
scroll key to select the required
setting. Then press the {Yes}
key.
I
Either:
• Program another Quick Dial:
go to step B B B B .
• Finish: press the { { { { Function} } } }
key.
Note
The procedure for storing a
Speed Dial using Function 32 is
188
Y/N
a label for this
Y/hi
ON iOFF
Y/hi
iON OFF
exactly similar to that shown
above; it is the same as the pro-
cedure for the base machine ex-
cept that you have to select G3
or G4 and you may need to in-
put a subaddress.
Automatic Fallback from
Group 4 Mode to Group 3
Mode
If your machine cannot communicate
with the other party using Group 4
mode, it will try using Group 3 mode.
This will allow your machine to send
the message even if you selected
Group 4 mode instead of Group 3
mode by mistake.