Secured Polling (Function 14); Stored Id Override - Ricoh FAX2900L Operator's Manual

SMTEN990427_FM.book Page 103 Thursday, September 2, 1999 10:03 AM
Note
If you see
ALREADY INPUT
already have a message on Free
Polling Standby. To clear the
old message: Clear the old poll-
ing transmission file by Func-
tion 23 (See P.105 "Canceling a
Polling Transmission (Function
23)"). And start from the step A
again.

Secured Polling (Function 14)

A
Place your document in the feed-
er.
TRANSMIT
DIAL FAX NUMBER
B
Press the { { { { Function} } } } { { { { 1} } } } { { { { 4} } } } and
the { { { { Yes} } } } key.
POLLING TRANS
PUSH START
Note
If you have not yet stored an ID
Code using Function 61, you
will be asked to enter an ID
Code. Proceed in the same way
as for step D in P.103 "Stored ID
Override".
C
Press the { { { { Start} } } } key.
Your fax message is stored and
held on polling standby.
Note
If you see
ALREADY INPUT
already have a message on Se-
cured Polling Standby.
• To erase the old message:
Clear the old polling trans-
mission file by Function 23
(See P.105 "Canceling a Poll-
Leaving a Document to Be Picked up by Others (Polling Transmission)
you
• To keep the old message: In-

Stored ID Override

This procedure will override the ID
Code stored in your machine. The
override is only effective for this one
transmission.
A
Place your document in the feed-
er.
OPTIONi
TRANSMIT
DIAL FAX NUMBER
B
Press the { { { { Function} } } } { { { { 1} } } } { { { { 4} } } } and
the { { { { Yes} } } } key.
OPTi
POLLING TRANS
PUSH START
C
Press V V V V until the screen is as
shown.
SET OPTION
SET POLLING ID?
D
Press the { { { { Yes} } } } key.
SET OPTION
ID:kkkk
E
Enter the ID code that you wish to
you
use for this message.
SET OPTION
ID:2567
ing Transmission (Function
23)").
put an ID code in the same
way as for step C in P.103
"Stored ID Override".
OPTIONi
OPTi
Y/i
KPAD
Y/N
5
103