Connecting The Power And Switching On - Ricoh FAX2900L Operator's Manual

SMTEN990427_FM.book Page 211 Thursday, September 2, 1999 10:03 AM

Connecting the Power and Switching on

Do not switch on until everything is connected properly.
A
Insert the power cable into the socket located at the rear of the machine.
B
Plug in the cable to the mains.
C
Turn the power switch on.
Important
The supply from the wall outlet must not fluctuate more than 20V either
side of 115 Vac.
The power cord should not be laid in a place where it might trip somebody.
Do not lay anything on the power cord.
If you have to use an extension cord, make sure that it is capable of carry-
ing 125V/15A, and that your facsimile terminal is the only piece of equip-
ment connected that cord.
Connecting the Power and Switching on
TSTP090N
10
211