Adjusting The Volume Of Various Features (Function 92) - Ricoh FAX2900L Operator's Manual

SMTEN990427_FM.book Page 174 Thursday, September 2, 1999 10:03 AM
Technical Reference
Adjusting the Volume of Various Features
(Function 92)
You can change the beeper (monitor) volume of the desired feature.
ONHOOK MONITOR
TRANS MONITOR
RECV MONITOR
DIAL MONITOR
BUZZER
KEY
A
Press the { { { { Function} } } } { { { { 6} } } } then enter the access number { { { { 2} } } } { { { { 2} } } } { { { { 2} } } } { { { { 2} } } } . Then
press { { { { 9} } } } { { { { 2} } } } .
ADJUSTMENT
92 ADJUST VOLUME
B
Press the { { { { Yes} } } } key.
ONHOOK MONITOR
8
C
Press the W W W W and V V V V keys to select feature.
TRANS MONITOR
D
Press the W W W W and V V V V keys to select the beeper (monitor) volume and { { { { Yes} } } } key
when you're done.
TRANS MONITOR
MIN iii
E
Press the { { { { Function} } } } key to return to standby mode.
174
Beeps to signal on hook dialing.
Beeps to signal transmissions.
Beeps to signal receptions.
Beeps when a number is dialed.
Beeps (doesn't buzz) to signal something going
amiss.
Beeps when a key is pressed.
Y/NEXTi
Y/N/hi
Y/N/hi
Y/hi
MAX