Table of Contents
Advertisement
1-8. Confidential ID (Memory Card or Hard Disk required)
1.
Function
1 then ↓
6
shown opposite.
If no memory card or hard disk is in -
stalled, you will not see this prompt.
2.
Yes
3. Input the Confidential ID that you will be
using. Example: 6
You must input this ID when you wish to print a
confidential message. If you cannot output a con-
fidential file with this ID, the sender may have
over-ridden your ID. Contact the sender.
4.
Yes
Function
If you do not store a Confidential ID, you will not be able to receive
confidential messages.
1-9. Memory Lock ID (Memory Card or Hard Disk required)
1.
Function
1 then ↓
6
shown opposite.
If no memory card or hard disk is in -
stalled, you will not see this prompt.
2.
Yes
3. Input the Memory Lock ID that you will
be using.
Example: 6
You must input this ID when you wish to print an
incoming message that was stored under the
protection of the Memory Lock feature.
4.
Yes
Function
To switch Memory Lock on or off, see page 71.
To print messages from Memory Lock, see page 58.
6
0
2
2
2
until the screen is as
7
5
4
6
0
2
2
2
until the screen is as
7
5
4
SECTION 4. PROGRAMMING THE MACHINE
2
CONFIDENTIAL ID
TO SET
YES
TO CANCEL
NO
CONFIDENTIAL ID
ID SETTING
_
CONFIDENTIAL ID
OR
YES
6754
2
MEMORY LOCK ID
TO SET
YES
TO CANCEL
NO
MEMORY LOCK ID
ID SETTING
_
MEMORY LOCK ID
OR
YES
6754
PREVIOUS
NEXT
YES
.
CLR
NO
PREVIOUS
NEXT
YES
.
CLR
NO
TO END
TO END
67
Advertisement
Table of Contents
