Report Formats - Ricoh FAX2900L Operator's Manual

SMTEN990427_FM.book Page 48 Thursday, September 2, 1999 10:03 AM
Other Features
communication failure report is
printed after a job has been com-
pleted. And at the end, it prints a
communication failure or trans-
mission result report. Check it, and
retransmit any pages that were not
sent. If a particular problem con-
tinues or gets worse, keep the error
reports for the service technician.
Polling Result Report (Switch 03, Bit
4)
This report is printed after your
machine polls a message from an-
other machine.
Polling Reserve Report (Switch 03, Bit
3)
5
If you switch this report on, it is
printed automatically after you
program the machine for polling

Report Formats

* * * COMMUNICATION RESULT REPORT (NOV.24.1999
FILE MODE
<TX>
DATE TIME
<RX>
DATE TIME
48
OPTION ADDRESS (GROUP)
* * * JOURNAL(NOV.24.1999 11:07PM) * * *
ADDRESS MODE TIME
ADDRESS MODE TIME
reception (immediate or send lat-
er). It gives the file number, time of
polling, and destinations (includ-
ing any Group numbers that you
selected).
Polling Clear Report (Switch 03, Bit 6)
This report is printed after a poll-
ing file has been erased from mem-
ory.
Printing Part of the Image on the Re-
port (Switch 04, bit 7)
For reference purposes, the ma-
chine prints the first few inches of
the fax message on the following
reports.
• Communication Result
• File Reserve
• Communication Failure Report
9:19PM) * * *
TTI XYZ COMPANY
RESULT
TTI XYZ COMPANY
PAGE RESULT PERS.NAME
PAGE RESULT PERS.NAME
PAGE
FILE
FILE
GFLIST3N