- TTI (Function 64) -
1. Make sure that the machine is in standby mode.
2. Press Function, enter 64, and press Yes.
3. Type in the TTl in the same way as the RTI.
Note: The TTl can have up to 32 characters.
- CSI (Function 65) -
1. Make sure that the machine is in standby mode.
Note: German and Italian versions - Enter the service mode. Press 1, 2, 3, *, 0, and # together.
2. Press Function, enter 65, and press Yes.
3. Type in the fax terminal's telephone number at the ten-key pad.
Note: The CSI can have up to 20 characters (numbers and spaces only).
4. At the end of the CSI, press #, then Yes, then Function.
4. Polling ID Code - Function 62
This is necessary for closed network, secured polling, and transfer request. All terminals in these types of
communication must have the same ID code or the communication will fail.
1. Make sure that the machine is in standby mode.
2. Press Function, enter 62, and press Yes.
3. Type in the polling ID code. Do not use 0000 or FFFF.
4. Press Yes, then Function.
1-22