Monitoring the Power System in the Cisco cBR
Chassis
•
•
Monitoring the Power System in the Cisco cBR Chassis Using
LEDs
Table 33: Verifying the LEDs on the AC FPEM
LED
POWER ENABLE
LED
Note
VER 01 of the AC FPEM has P0 AC PRESENT LED through P5 AC PRESENT LED. The PRESENT LEDs
indicate input AC power for the corresponding AC Power Modules (also indicated on the front of the Power
Module). Updated AC FPEM started shipping from April, 2018.
Table 34: Verifying the LEDs on the DC FPEM
LED
POWER ENABLE
LED
Monitoring the Power System in the Cisco cBR Chassis Using LEDs, on page 171
Monitoring the Power System in the Cisco cBR Chassis Using CLI, on page 173
Status
Green
Off
Status
Green
Off
C H A P T E R
Description
The chassis power is on.
The chassis power is off.
Description
The chassis power is on.
The chassis power is off.
Cisco Converged Broadband Routers Hardware Installation Guide
11
171