Installing The Air Filter On A Card - Cisco cBR Series Hardware Installation Manual

Maintaining the Air Filter in the Cisco cBR Chassis
Figure 154: Removing Air Filter from a Supervisor Card
What to do next
Dispose the air filter according to local safety and compliance guidelines.

Installing the Air Filter on a Card

Note Attach an ESD-preventive wrist strap to your wrist and connect its end to the grounding lug that is connected
to the chassis.
Before you begin
Required Tools and Equipment
• Air filter for the RF line card (PID—CBR-LC-FILTER and CBR-LC-FILTER=)
• Air filter for the Supervisor card (PID—CBR-SUP-FILTER and CBR-SUP-FILTER=)
• ESD-preventive Wrist Strap
Cisco Converged Broadband Routers Hardware Installation Guide
Installing the Air Filter on a Card
237