Cisco cBR Series Hardware Installation Manual page 29

What is a Cisco cBR Series Converged Broadband Router
Supervisor Card
The Supervisor Card is the route processor of the Cisco cBR and includes integrated backhaul capability. It
is installed in the front of the Cisco cBR chassis. The plastic latch maintains the alignment of the spring-loaded
ejector with the faceplate. The Supervisor Card has a tethered door to allow access to the ports on its faceplate.
Figure 12: Supervisor Card
1
2
3
4
Table 13: Physical Specifications of the Supervisor Card
Unit
Depth
Width
Height
Maximum weight
Table 14: Ports on the Supervisor Card
Port
USB ports
Spring-loaded ejector
Tethered I/O door
Plastic latch
Removable air filter
Cisco cBR-8 Converged Cable Access Router Supervisor 250G
5 LEDs
6 Support rails
7 USB ports
8 Console port
Value
19.98 in (50.7 cm)
16.27 in (41.3 cm)
2.82 in (7.16 cm)
26 lb (11.8 kg)
Description
The Supervisor Card has two type-A USB ports. These
ports are used for connecting external memory sticks
or flash drives to load configurations.
Cisco Converged Broadband Routers Hardware Installation Guide
21