Attaching The Chassis Rack-Mount Brackets - Cisco cBR Series Hardware Installation Manual

Installing the Cisco cBR Chassis
Figure 26: Chassis Installation Bracket
1
After you install the chassis and secure it to the rack, remove the chassis installation brackets from the rack.
Note
The chassis does not need these brackets for supporting the weight, after all rack mount screws are secured.

Attaching the Chassis Rack-Mount Brackets

Before installing the chassis in the rack, you must install the rack-mount brackets on each side of the chassis.
Note
After you install the chassis rack-mount brackets and mount the chassis in the rack, the rear RF
cable-management brackets are installed on the chassis.
Attach the rack-mounting brackets either in the front or the middle of the chassis.
Chassis Installation Bracket
Cisco Converged Broadband Routers Hardware Installation Guide
Attaching the Chassis Rack-Mount Brackets
57