Cisco cBR Series Hardware Installation Manual page 186

Converged broadband routers
Hide thumbs Also See for cBR Series:
Table of Contents

Advertisement

Monitoring the Supervisor 160G in the Cisco cBR Chassis Using LEDs
LED
SFP+
DTI Normal
DTI Fast
NME Lnk
NME Act
SSD
CM/DTP Lnk
CM/DTP Act
Cisco Converged Broadband Routers Hardware Installation Guide
178
Monitoring the Supervisor in the Cisco cBR Chassis
Status
Off
Yellow
Green
Blinking green
Off
Green
Blinking green
Off
Yellow
Off
Green
Off
Blinking yellow
Off
Green
Description
The SFP+ module is not powered
up.
The SFP+ module is powered up
and the link is down.
The link is up with no active traffic.
The link is up with active traffic.
DTI is not in normal mode.
DTI is in normal mode.
DTI is in normal mode as standby.
DTI is not in fast mode.
DTI is in fast mode.
The Gigabit Ethernet link is down.
The Gigabit Ethernet link is up.
The Gigabit Ethernet link is down.
The Gigabit Ethernet link is up with
active traffic.
There is no SSD access.
SSD read/write is in progress.
Reserved for future use.
Reserved for future use.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Cbr-8

Table of Contents