Attaching the Fiber or Cable Routing Guide on Chassis
Step 2
Align the slots on the strap-down clip with the knurled screws installed on the chassis and push down until it snaps in
place.
Step 3
Repeat
Step 2, on page 68
Step 4
Attach the snap-on plastic guides on the strap-down clip, as necessary.
Ensure that the orientation of the fiber or cable routing guide is proper by placing the smaller slot used for fiber
Note
on the top.
Cisco Converged Broadband Routers Hardware Installation Guide
68
for the other strap-down clip.
Installing the Cisco cBR Chassis