Cisco cBR Series Hardware Installation Manual page 33

Converged broadband routers
Hide thumbs Also See for cBR Series:
Table of Contents

Advertisement

What is a Cisco cBR Series Converged Broadband Router
LED
SSD
CM/DTP Lnk
CM/DTP Act
Interface Cards
The Subscriber Side Interface (SSI) card (line card) provides the DOCSIS MAC/PHY or DOCSIS MAC
function in the Cisco cBR router.
The front of the line card has spring-loaded ejectors with plastic latches, on both sides of the interface line
card. The plastic latch maintains the spring-loaded ejector's alignment with the faceplate.
The line cards have perforated grill faceplate that allow air flow into the card. There is a removable filter in
the front panel of the line card. This filter filters the air flowing into the chassis through the perforated grill
faceplate.
All interface cards in the Cisco cBR-8 chassis are designed for High Availability (HA) with a N+1 redundancy
scheme.
The Cisco cBR-8 supports the following interface cards:
• Interface Line Card (SSI Card, DOCSIS MAC or DOCSIS MAC/PHY line card)—Provides the service
• RF Through PIC or Digital Through PIC—Connects to the interface line card. This PIC provides the
• RF Protect PIC or Digital Protect PIC—Provides connection of the redundant line card to the appropriate
Interface Line Card Blank
Apart from the operational interface line cards, an interface line card blank (line card blank) is installed in
any empty unused line card slot, to ensure proper airflow within the operational chassis.
PIC Blank
Apart from the operational PICs, a PIC blank is installed in any empty unused PIC slot, to ensure proper
airflow within the operational chassis.
Protect Zone
To configure N+1 RF redundancy, the interface line card installed in the uppermost slot is configured as the
Protect line card with the Protect PIC installed in the corresponding PIC slot. The working line cards and the
Through PIC cards installed successively below the Protect line card and PIC card form a Protect Zone. The
following are the restrictions for the Protect Zone:
• Each protect zone has one Protect PIC card at the top with a set of Through PIC cards installed successively
side functionality such as DOCSIS, Edge QAM, EPON, or other service blades.
physical interface to the facility for the line card.
Through PIC.
below the protect line card.
Description
SSD access status LED
Reserved for future use
Reserved for future use
Cisco Converged Broadband Routers Hardware Installation Guide
Interface Cards
25

Advertisement

Table of Contents
loading

This manual is also suitable for:

Cbr-8

Table of Contents