Cisco cBR Series Hardware Installation Manual page 14

Physical Description
1
2
3
The Cisco cBR-8 chassis supports:
• Two Supervisor Cards
• Two Supervisor PICs
• Eight Cisco cBR line cards
• Eight Cisco cBR RF PIC cards (seven when the chassis is configured in protect mode) or Eight Cisco
• One Cisco cBR RF PROT PIC card (if the chassis is configured in RF protect mode)
• Six DC Power Modules with redundant input feeds or six AC Power Modules
• One Cisco cBR DC FPEM or one Cisco cBR AC FPEM
• Five Fan Modules
Physical Description
Table 1: Cisco cBR-8 Chassis Physical Description Summary
Parameter
Height
Width
Overall Depth
Weight
Airflow
Cisco cBR-8 Chassis Dimensions
The below image shows the basic dimensions of the Cisco cBR-8 chassis.
Cisco Converged Broadband Routers Hardware Installation Guide
6
Line Card PIC
Supervisor PIC
Fan Module
cBR DPIC cards (if -R line cards are installed)
What is a Cisco cBR Series Converged Broadband Router
4 Lifting Handle
5 DC FPEM
Description
13RU (22.75 in./57.78 cm)
17.45 in. (44.32 cm) without rack mounts
17.65 in. (44.83 cm) with rack mounts
28.075 in. (71.3 cm)
429 lb (195 kg) maximum fully loaded
Front-to-back