Using The Nme Ports On The Supervisor Pic; Using The Console Port On The Supervisor Pic - Cisco cBR Series Hardware Installation Manual

Installing the Supervisor in the Cisco cBR Chassis
Step 2
Connect the other end of the RJ-45 cable to the to the DTI server as a reference clock source.
What to do next
Route the RJ-45 cable through the Supervisor PIC cable management bracket and chassis-mounted fiber/cable
routing

Using the NME Ports on the Supervisor PIC

Before you begin
•
•
Required Tools and Equipment
• RJ-45 cable
• Switch
Step 1 Connect one end of the RJ-45 cable to the NME port on the Supervisor PIC.
Figure 83: NME Port Connection on the Supervisor PIC
Step 2
Connect the other end of the RJ-45 cable to a switch.
What to do next
Route the RJ-45 cable through the Supervisor PIC cable management bracket and chassis-mounted fiber/cable
routing

Using the Console Port on the Supervisor PIC

The console port provides local administrative access to the router and its command-line interface (CLI).
guide.
Install the Supervisor PIC.
Install the Supervisor Card.
guide.
Cisco Converged Broadband Routers Hardware Installation Guide
Using the NME Ports on the Supervisor PIC
121