Removing The Power Cassette Module From The Cisco Cbr Chassis - Cisco cBR Series Hardware Installation Manual

Maintaining the Power System in the Cisco cBR Chassis
What to do next
Replace the FPEM
Removing the Power Cassette Module from the Cisco cBR
Chassis
Before you begin
•
• Be aware of the weight and size of the equipment. Handle it with care.
Required Tools and Equipment
• 3/16" flat-blade torque screwdriver
• T10 Torx screwdriver
Step 1 Loosen the two screws on the front power entry bezel using a 3/16" flat-blade torque screwdriver. Remove the bezel from
the chassis.
(if required).
Remove the Power Modules.

Removing the Power Cassette Module from the Cisco cBR Chassis

Cisco Converged Broadband Routers Hardware Installation Guide
195