Cisco cBR Series Hardware Installation Manual page 214

Removing the Supervisor PIC from the Cisco cBR Chassis
Figure 129: Opening the Ejector Levers on the Supervisor PIC
Step 3
Carefully slide the PIC out of the slot applying even pressure using both your hands.
Figure 130: Removing the Supervisor PIC from the Chassis
Step 4 Place the removed Supervisor PIC in an antistatic bag.
The removed blank PIC does not need to be placed in an antistatic bag.
Note
Cisco Converged Broadband Routers Hardware Installation Guide
206
Maintaining the Supervisor in the Cisco cBR Chassis