Cisco cBR Series Hardware Installation Manual page 205

Maintaining the Power System in the Cisco cBR Chassis
Figure 122: Removing the Power Cassette Module from the Chassis
What to do next
• Replace the Power Cassette Module
• Position the front power entry bezel on the chassis. Insert and tighten the two screws using a 3/16"
flat-blade torque screwdriver with a torque of 5-7 in-lb (0.56-0.79 Nm) to secure the bezel.
Removing the Power Cassette Module from the Cisco cBR Chassis
(if required).
Cisco Converged Broadband Routers Hardware Installation Guide
197