Table of Contents
Related Manuals for Cisco CVR328W
Summary of Contents for Cisco CVR328W
- Page 1 Quick Start Guide Cisco CVR328W Wireless-N 3G VPN Router Package Contents • CVR328W Wireless-N 3G VPN Router • Power Adapter and Power Cord • Quick Start Guide • Ethernet Cable • Product Warranty • Pointer Card with China RoHS...
-
Page 2: Before You Begin
• PC with Microsoft Internet Explorer 6.0 (or higher) or Mozilla Firefox 3.0 (or higher) for using web-based Configuration Utility. • (Optional) Tools for attaching the CVR328W to the wall. Instructions are provided for wall-mounting, but the wall-mounting hardware is user-supplied. -
Page 3: Front Panel
WAN1 port, but there is no traffic over this port. • Flashes green when the router is sending or receiving data over the WAN1 port. • Off when the WAN1 port has no connection. Cisco CVR328W Wireless-N 3G VPN Router Quick Start Guide... - Page 4 Network Management System (NMS) but has no operations. • Flashes green when the router is connected to an upper-level NMS and has operations. • Off when the router does not connect to an upper-level NMS. Cisco CVR328W Wireless-N 3G VPN Router Quick Start Guide...
-
Page 5: Back Panel
Back Panel 3G USB Port Insert a 3G USB device into this port to connect your CVR328W to a 3G wireless network. To get the list of 3G USB dongle models supported by the CVR328W, go to www.cisco.com/go/cn/cvr328w. USB Port Insert a USB storage device into this port to save syslog messages. -
Page 6: Wall Mounting
• Mechanical Loading—Be sure that the CVR328W is level and stable to avoid any hazardous conditions. Place the CVR328W horizontally on a flat surface so that it sits on its four rubber feet. Wall Mounting The CVR328W can be wall-mounted. The wall-mounting hardware is user-supplied. - Page 7 Use the default wireless network name (SSID) and pre-shared key that are provided on the product label at the bottom of the CVR328W to connect the PC to your wireless network for the first time.
-
Page 8: Getting Started With The Configuration
To log in to the utility and launch the Setup Wizard to complete the initial configuration: Connect a PC to an available LAN port of the CVR328W. After you power on the PC, your PC will become a DHCP client of the CVR328W and will receive an IP address in the 192.168.1.xxx... -
Page 9: Where To Go From Here
Open Source Used in www.cisco.com/go/cn/cvr328w CVR328W Regulatory Compliance www.cisco.com/go/cn/cvr328w and Safety Information Product Warranty www.cisco.com/web/CN/solutions/ Information industry/segment_sol/small/ index.html#~service Product Service Hotline (+86) 8008888168 (Telephone) (+86) 4006282616 (Mobile phone) Cisco CVR328W Wireless-N 3G VPN Router Quick Start Guide... - Page 10 Cisco and the Cisco logo are trademarks or registered trademarks of Cisco and/or its affiliates in the U.S. and other countries. To view a list of Cisco trademarks, go to this URL: www.cisco.com/go/trademarks. Third-party trademarks mentioned are the property of their respective owners.