Kia XCeed 2020 Owner's Manual page 673

Maintenance
Head lamp low beam (LHD Vehicle)
A: Vehicle axis
B: Vertical line of the left head lamp bulb center
C: Vertical line of the right head lamp bulb center
D: Horizontal line of head lamp bulb center
E: Ground
F: Cut-Off line
1. Turn the low beam on without driver aboard.
2. The cut-off line should be projected in the cut-off line shown in the
picture.
3. When aiming the low beam, vertical aiming should be adjusted after
adjusting the horizontal aiming.
4. If head lamp leveling device is equipped, adjust the head lamp leveling
device switch with 0 positions.
Based on 10m screen
W1
OJF075107L
Light bulbs
8 123
8