Turn Signals And Lane Change Signals - Kia XCeed 2020 Owner's Manual

Features of your vehicle
always check the road conditions
for your safety. When the system
does not operate normally,
manually change between the
high beam and low beam.
Turn signals and lane change
signals
OCDW049444
The ignition switch must be on for
the turn signals to function. To turn
on the turn signals, move the lever
up or down (A).
The green arrow indicators on the
instrument panel indicate which
turn signal is operating. They will
selfcancel after a turn is completed.
If the indicator continues to flash
after a turn, manually return the
lever to the off position.
To signal a lane change, move the
turn signal lever slightly and hold it
in position (B). The lever will return
to the off position when released.
4 128
If an indicator stays on and does
not flash or if it flashes abnormally,
one of the turn signal bulbs may
be burned out and will require
replacement.
One-touch lane change function
To activate a one-touch turn signal
function, move the turn signal lever
slightly and then release it. The lane
change signals will blink 3, 5 or 7
times.
You can activate/deactivate the
One Touch Turn Signal function or
choose the number of blinks (3, 5, or
7) from the User Settings mode on
the LCD WINDOWS. For more details,
refer to "User settings mode" on
page 4-75.
NOTICE
If an indicator flash is abnormally
quick or slow, a bulb may be
burned out or have a poor electrical
connection in the circuit.
Lighting